09-22
2018
The strength and toughness index of threaded pipe fittings are the best among various steels. The most prominent advantage is corrosion resistance. Stainless steel must be used in corrosive environments such as chemical papermak…
09-22
2018
Classification of threaded pipe fittings: The threaded thread is a kind of connection method, that is, the connecting place is threaded; the threaded pipe fittings are divided into two types, one is an inner wire and the other i…
09-18
2018
Threaded ball valves are suitable for a wide range of applications, from small to a few millimeters up to a few meters, from high vacuum to high pressure.
09-18
2018
The threaded valve is divided into the flow direction of the medium, and has a straight-through type, a direct current type and an angle type. The shut-off valve is divided according to the sealing form, and there are a packing …
09-18
2018
Stainless steel wire ball valve During installation, please do not use the actuator part of the valve as a lifting point to avoid damage to the actuator and accessories.
09-18
2018
Remove the protective cover on both sides of the flange end, and rinse and clean the valve in the state where the valve is fully open. Before installation, the machine should be tested according to the specified signal.
© 2018 Wenzhou Yakai Mechanical Technology Co.,Ltd. All Rights Reserved. Design: Nsoso.com